International Journal of Mechanical and Industrial Engineering
Abstract
This project mainly deals with analysis of tensile properties of Palmyra fiber Reinforced Epoxy Composite that is suitable for automobile application. First, the property of material was obtained on the basis of some assumptions (i.e., Rule of Mixture) and was modeled with reference to ASTM D638. Here the simulation was carried out on specimen under different fiber volume fraction and fiber length. The present work includes the Analysis of Palmyra Fiber Reinforced Epoxy Composites using FEA with various fiber volume fractions and these results were validated with the experimental result. The tensile property of Palmyra fiber composite material can be obtained by using tensometer.During the tensile load, the maximum strain, stress and displacement were obtained and, then this experimental result was compared with the analytical results and the error percentage of these results were calculated.
Recommended Citation
VELMURUGAN, G.; VADIVEL, D.; ARRAVIND, R.; VENGATESAN, S.P.; and MATHIAZHAGAN, A.
(2014)
"TENSILE TEST ANALYSIS OF NATURAL FIBER REINFORCED COMPOSITE,"
International Journal of Mechanical and Industrial Engineering: Vol. 3:
Iss.
3, Article 1.
DOI: 10.47893/IJMIE.2014.1145
Available at:
https://www.interscience.in/ijmie/vol3/iss3/1
DOI
10.47893/IJMIE.2014.1145
Included in
Manufacturing Commons, Operations Research, Systems Engineering and Industrial Engineering Commons, Risk Analysis Commons